Owner’s Manual Soundbar MSB4560 Magnavox is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America. Soundbar MSB4560_DFU_20140522.
Soundbar MSB4560_DFU_20140522.
Table of Connects 1 2 3 4 5 6 7 Notice........................................................................................................................................................2 1.1 Notice of Compliance..............................................................................................................................................2 1.2 Trademark.......................................................................................................................................
1 Notice This section contains the legal and trademark notices. 1.1 Notice of Compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1.2 Trademarks Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Funai Electric Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. 2 Important Read and understand all instructions before you use your SoundBar.
•• •• •• •• •• •• • 4 moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storm or when unused for long periods of time. Refer all servicing to qualified service personnel.
2.2 Care of the environment • • This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed liter ature closely to prevent operating and maintenance problems.
3 Your SoundBar 3.1.2 Back connectors of main unit Connect other devices to your SoundBar. Congratulations on your purchase. 3.1 Main unit 3.1.1 Front panel of main unit a SOFTWARE UPGRADE a OPTICAL IN LINE IN b POWER AUX e AUX IN b INPUT LINE OPTICAL AC IN d PAIR a POWER ( Standby indicator ) When the SoundBar is on standby ,the standby indicator is red. b Source indicators When Dolby Digital audio is input, all the source indicators blink three times.
a (Standby-On) Switch the SoundBar on or off. b Source buttons • AUX INPUT: Switch your audio source to the AUX connection. • LINE INPUT: Switch your audio source to the Line in (3.5mm jack) connection. • OPTICAL IN: Switch your audio source to the optical connection. • Bluetooth INPUT: Switch your audio source to the bluetooth connection. 3.3 Wireless Subwoofer 3.3.1 Back panel of Subwoofer The SoundBar comes with a wireless subwoofer. c MUTE Mute or restore volume.
3.3.2 Pair up with the subwoofer The wireless subwoofer automatically pairs up with the SoundBar for wireless connection when you turn on the SoundBar and the subwoofer. If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer. 1 2 3 4 5 Turn on the SoundBar and the subwoofer. • if the connection to the SoundBar is lost, the indicator on the subwoofer blinks white slowly. Press the CONNECT button on the subwoofer to enter the pairing mode.
4.2 Wall mount the SoundBar (optional). 4.3 Connections Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. Connect your SoundBar to a TV through line in cable. You can listen to audio from TV programs through your SoundBar. 4.3.1 Connect to TV LINE IN 3.5-4mm INPUT LINE POWER AUX INPUT LINE OPTICAL PAIR 4mm Note > 25mm See the illustration in the quick start guide on how to wall mount the SoundBar.
4.3.2 Connect audio from other device Play audio other devices through your Soundbar speakers. Note •• During play, do not plug out the audio cable. Connect audio through a digital optical cable(Not supplied). OPTICAL IN INPUT OPTICAL POWER AUX LINE INPUT OPTICAL 5 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual.
5.2 Choose your sound Select predefined sound modes to suit your video or music. Press sound setting buttons on Remote control to select a sound mode. »» When a button is pressed, the power indicator blinks once. • MUSIC: Recreate the original recording environment of you music,in the studio or at a concert. • MOVIE: Enjoy a cinematic audio experience, specially enhanced for movies. • NEWS: Hear every word with optimized speech and clear vocals. • CLASSIC: Flat and pure sound mode.
5.5 Auto Standby When playing media from a connected device, the SoundBar automatically switches to standby after 20 minutes if no audio play from a connected device. 5.6 Apply factory settings You can reset your SoundBar to the default settings programmed at the factory. 1 2 On your remote control, press LINE INPUT button. Press MUSIC, VOL- and NEWS on remote control within 3 seconds to perform factory default settings.
6 Product technical data Specifications and design are subject to change without notice. Specifications Amplifier RMS Total output power: 76 W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: XXX • LINE IN: XXX Bluetooth • Bluetooth profiles: A2DP, AVRCP • Bluetooth version: 3.0 + EDR Main unit • Power supply: 120V~, 60 Hz • Power consumption: 15 W • Standby power consumption: ≤ 0.
7 Troubleshooting To keep the warranty valid, never try to repair the product yourself. Malfunctions may occur with any electrical equipment. This must not always involve a defect of the device. Therefore, check the following table to see if you can eliminate the problem yourself. Malfunction Possible cause/ Elimination The SoundBar does not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. No sound from SoundBar speakers.
15 Soundbar MSB4560_DFU_20140522.
