User's Manual
9
4.3 Connections
4.3.1 Connect to TV
Connect your SoundBar to a TV through line in
cable. You can listen to audio from TV programs
through your SoundBar.
LINE IN
LINE
INPUT
POWER AUX PAIR
INPUT
LINE
OPTICAL
Note
• During play, do not plug out the line in cable.
• On your TV, it is recommended to set the volume
in the range of 60% maximum volume to avoid the
distortion of audio output.
If your TV supports OPTICAL OUT feature,
connect your Soundbar to TV through a digital
optical cable(Not supplied).
OPTICAL IN
POWER AUX LINE OPTICAL PAIR
OPTICAL
INPUT
INPUT
4.2 Wall mount the
SoundBar (optional).
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
> 25mm
3.5-4mm
4mm
See the illustration in the quick start guide on
how to wall mount the SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.
Warning
• Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
• Before wall mounting, make sure the wall can support
the weight of your SoundBar.
• Funai is not liable for improper wall mounting that result
in accident, injury or damage.
• Install the Soundbar on the sturdy vertical wall.
• Do not install the Soundbar onto a ceiling or slanted
wall, it may easy to fall down and result in severe
injury.
• Do not use the screws that are shorter than the
specied length, it may cause the Soundbar to fall
down easily.
• Do not mount the Soundbar on a wall while the
Soundbar is plugged in or turned on, it may result in
an electrical shock injury.
Soundbar MSB4560_DFU_20140522.indd 9 2014/5/22 04:45:49