User's Manual

11
4 Select and play audio les or music on
your bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
5 To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
• The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
• If you want to connect your SoundBar with another
Bluetooth device, press PAIR button to disconnect the
currently connection.
5.4 Night mode
Night Mode is a digital Audio feature equipped
with Dolby digital decoder. When you watch
movie late at night, lowering volume level
during loud sound scenes, dynamic range will
be pressed down and you miss some dialogue
and narration. With this “Night Mode” you can
control volume level down but still can enjoy
fair level of audio tone and voice.
1 In any mode, Long press CLASSIC on
remote control for 3 seconds to switch
night mode on or off.
» The OPTICAL INPUT indicator on
the front panel of main unit blinks
three times when the night mode is on.
» The OPTICAL INPUT indicator on
the front panel of main unit blinks once
when the night mode is off.
Note
• This product supports Dolby Digital and LPCM.
• DTS is not suported.
• Sampling frequency: 32KHz, 44.1KHz, 48KHz
5.2 Choose your sound
Select predened sound modes to suit your
video or music.
Press sound setting buttons on Remote control
to select a sound mode.
» When a button is pressed, the power
indicator blinks once.
• MUSIC: Recreate the original recording
environment of you music,in the studio or
at a concert.
• MOVIE: Enjoy a cinematic audio
experience, specially enhanced for movies.
• NEWS: Hear every word with optimized
speech and clear vocals.
• CLASSIC: Flat and pure sound mode. Ideal
for listening to classical music.
5.3 Play audio through
bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports version
as 3.0 + EDR.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1 Press on the remote control to switch
the SoundBar to Bluetooth mode.
» The PAIR INPUT indicator on the
front panel of main unit blinks slowly.
2 On the Bluetooth device, switch
on Bluetooth, search for and select
MAGNAVOX MSB4560 (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
3 When the Bluetooth connection succeeds,
the Bluetooth indicator lights up.
• If no any bluetooth device is connected
in two minutes, press PAIR on remote
control to activate the paring mode
again.
Soundbar MSB4560_DFU_20140522.indd 11 2014/5/22  04:45:51