User's Manual
21
8 Product specifications
Note
Specifi cation and design are subject to change •
without notice.
Region code
The type plate on the back or bottom of the
home theater shows which regions it supports
Playback media
AVCHD, BD-RE, BD-Video, DVD-Video, •
DVD+R/+RW, DVD-R/-RW, DVD+R/-R
DL, CD-R/CD-RW, Audio CD, Video CD/
SVCD, Picture CD, MP3-CD, WMA-CD,
DivX (Ultra)-CD, USB storage device
File Format
Audio: .mp3, .wma, .wav•
Video: .avi, .divx, .mp4, .mkv, .mov, .wmv•
Picture: .jpg, .gif, .png•
Amplifi er
Total output power: 1000 W RMS (30% •
THD)
FTC: 580 W (1% THD)*
•
Frequency response: 20 Hz-20 kHz / ±3dB•
Signal-to-noise ratio: > 65 dB (CCIR) / •
(A-weighted)
Input sensitivity:•
AUX: 500 mV
•
MP3 LINK: 300 mV•
* (main channel @ 1kHz sub channel 60 hz within 1% THD)
Video
Signal system: PAL / NTSC•
Component video output: 480i/576i, •
480p/576p, 720p, 1080i
HDMI output: 480i/576i, 480p/576p, 720p, •
1080i, 1080p, 1080p24
Country
DVD BD
USA, Canada
AA
1
Update software from a USB
1 Check for the latest software version on
www.philips.com/support.
Search for your model and click on •
‘software and drivers’.
2 Create a folder named ‘UPG’ in your USB
storage device.
3 Download the software into ‘UPG’ folder.
4 Unzip the software in the ‘UPG’ folder.
5 Connect the USB storage device to the
home theater.
6 Press ( Home ) and select [Setup] .
7 Select [Advanced Setup] > [Software
Update] > [USB] .
8 Follow the instructions on the TV to
confi rm the update.
When complete, the home theater »
automatically switches off and on again.
If not, disconnect the power cord for a
•
few seconds and then reconnect it.
Caution
Do not turn off the power or remove the USB •
storage device when the software update is in
progress because you might damage the home
theater.
English
EN