User's Manual

RF Wireless Optical Mouse User Manual
Product: 2.4G Wireless Optical Mouse
Model Number: DS-2116 (2116-A + 2121-G)
Welcome
Thank you for selecting this product! Your RF wireless optical mouse uses a newly developed RF wireless technology 2.4GHz that replaces
the traditional wired mouse. You can use your wireless optical mouse freely and improve your efficiency and enjoy your beautiful life from the high
technology. The receiver of this mouse can be put into its transmitter, and it is an outstanding design.
Product Features
1. Radio frequency 2.4G, enjoy your freely wireless space
2. It has 65000 ID code, there is no interference even many mice being used at the same time.
3. Automatically save power sleeping functions, battery life be prolonged.
4. 5 buttons and free definition functions .
Systems Compatibility
IBM PC and Win 98SE/Me/2000/XP, No need driver
The Steps of Install Battery
1. Please prepare for two PCS new AAA alkaline batteries
2. Press the two sides of the mouse transmitter and pull the battery cover rearward (Please see the reference picture)
3. Please insert the batteries correctly according to the polarity marks of the battery grooves.
4. Pull the battery covers forward, when you hear “crack” sound which shows the battery cover is locked successfully.。
Receiver Installation
1. Please use extended cable, and put the receiver and transmitter on one desktop, in this way, you may have higher working efficiency.
2. You may connect the receiver directly with the USB connector.
ID Setup
1. Please move the mouse near to the receiver
2. Press the ID button I the front of the receiver, the light of the receiver begins to flicker.
3. Press the ID button of the mouse bottom with some hard and acuate object within 10 seconds, the receiver light will flash very fast, a few
seconds later it will be on which shows it is successfully to finish the digital transmission between the mouse and the receiver. You may
start to use it.
4. Working distance: within 7-10 m.
user-defined buttons
after the installation of drive program, users can self define the buttons freely, as long as to press the button predefined, we can turn on the
preset function。before use self defined buttons, please install drive program first, so that we can use software to define functions
Installation of drive program
put the drive program disk into the CD-room, unfold the disk and run the file named setup exe. The system will run files automatically and
appear the picture below