User's Manual

DS-2472(Z4) 2.4G Wireless Gaming Mouse

Manual

Features

Using the best wireless gaming chip in the present market

Using high-end mainstream chip Avago A3000 with lower power consumption, the cursor is more

stable with smoother movement on different surfaces

Resolution: 500/1000/1500/2000 CPI with CPI conversion indicator, so the user could convert the

speed

Using the Infrared as the mobile tracing light

The fourth and fifth button could be used to define dozens of functions

Multi-stage Power saving mode to best save the battery energy, and the power supply could be

completely shut off.

Could be functioned as decorative light

Low battery indicator to indicate the time to change battery

Nano receiver to plug and play

How to install

1. Remove the package and take out the mouse

2. Plug the Nano USB into the corresponding port on the computer.

3. Put 1PCS AA alkaline batteries into the mouse according to correct polarity

4. Turn on swith at the bottom of the mouse, then the LED will blink for a few seconds, and now it

can be used

Advanced Functions:

1，CPI Adjustment

The mouse has 500/1000/1500/2000 four levels of gear CPI adjustment. Power-on default is

1000CPI. If you want to switch to other kind of speed, please click the CPI+ or CPI- button at the

top of the mouse that can be switched between four levels. During the switching process, if LED

indicator flashes once, it means the level is 500 CPI, twice means 1000 CPI , three times means

1500 CPI, and fourth means 2000 CPI.

2，Self-defined fourth and fifth button

The default functions of the fourth and fifth button at the side of the mouse are backward/forward.

If the specific drive were installed, then they could be used to define dozens of other kind of

functions.The drive could be found in the CD (if there is any) or in the specified website.

3， The decorative light function

Turn the switch at the bottom of the mouse to the spot of MOUSE/LED, then this function would

be turned on, and the mouse would shine with blue light.

Note: If this functioned were turned on while the wireless mouse was used for other functions, the

battery energy would be consumed rather quickly.

4，Low battery alert function

PAGE 1
DS-2472(Z4) 2.
PAGE 2
The longer the mouse were used, the lower battery voltage will slowly decreases .When the voltage is below the set reminder amount, the red LED indicator will flash to remind the user to replace them with new batteries. Note：only AA alkaline batteries can be used 5，Auto Sleep and Smart Shutdown functions If you don’t use the mouse for 8 minutes, the mouse will automatically sleep to save power. The user can just press any key to reboot.
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.