User's Manual

www.kodak.com/go/digitalframesupport 13
2 Using WiFi
®
(EX models only)
For more information on using the wireless features of your frame, see your user’s guide
at www.kodak.com/go/digitalframesupport or visit www.kodak.com/go/wifisupport.
Before you start
On your computer, make sure you:
■ Install the software that is packaged with your frame (page 1).
■ Enable media sharing in Windows Media Player 11 (select Library → Media
Sharing, then follow the screen directions).
Setting up your wireless network
Perform this one-time setup to connect your picture frame to your wireless network.
1 Make sure your computer is turned on.
2 Remove all memory cards or other USB devices from your frame and turn it on.
The first time you turn on your frame (after you select your language), the Network
Connection screen appears.
3 Follow the directions on the Network screens to connect to your wireless home
network.
NOTE: If you have network security turned on, you are prompted to enter your security information.
To set up your network at a later time, press , highlight Settings , and press OK.