User's Guide

2-18 7F3319 September 30, 2004

Operation and Maintenance

Main Menu You can access most of the Local Panel functions from this menu screen.

To display this screen: Touch Menu.

1 System Information button. Displays the System Information

Menu screen (see “System Information Menu” on page 2-26).

2 Setup Imager button. Displays the Setup Imager screen where

you can enter or adjust parameters such as the Imager network

address, hospital name and image quality parameters. See “Setup

Imager Screen” on page 2-31.

This menu choice is used when the Imager is initially installed,

when the configuration parameters must be changed or when

adding a modality.

Most of the setup functions require a Service passcode. (See “Local

Panel Passcodes” on page 2-57.)

Refer to Section 4 for setup procedures to add a modality.

Refer to the Kodak DryView 8150 Laser Imager Installation Guide

for the required setup procedures.

3 Current Errors button. Displays the Current Errors screen,

which lists errors detected by the Imager. See “Current Errors

Screen” on page 2-29. If there are no errors, this button will be

disabled.