User's Guide

Operation and Maintenance

September 30, 2004 7F3319 2-31

Setup Imager Screen This screen is the entry point for all of the Imager configuration functions.

These functions are used primarily for installation of the Imager, not for

normal operation. Most of these functions require the Service passcode. A

few of the Local Panel setup functions are accessible with a Key Operator

passcode.

To display this screen: Menu > Setup Imager

1Network setup. Select to display the Edit network

configuration screen. (See page 2-32.)

2 Date and Time. Select to display the Date Time screen. (See

page 2-33.)

3 Modality (SCU) config. Select to display the Select Modality

screen. This is the entry point for setting parameters related to each

modality that will print to the Imager. (See page 2-34.)

4 Local Panel. Select to display the Setup Local Panel screen.

(See page 2-35.)

5 Edit service telephone number. Select to display for changing

the service telephone number (See page 2-36.)

6 Backup configuration. Select to perform a configuration backup

operation. (See “Backing up the Configuration” on page 4-22

7 Restore configuration. Select to restore the Imager

configuration parameters from a prerecorded backup file. (See

“Restore Configuration” on page 2-37.)