User's Guide

Operation and Maintenance
September 30, 2004 7F3319 2-35
Setup Local Panel Screen From this screen you can access several other screens that allow you to
adjust some of the Local Panel properties.
To display this screen: Menu > Setup Imager > Local Panel
Calibrate touch accuracy - Displays a screen for setting the accuracy of
the touch buttons on the Local Panel. Requires the Service passcode.
Touch Beep Duration - Displays a screen for setting the duration of the
"beep" that sounds when any button is touched. Requires a Key Operator
passcode. Refer to “Adjust Touch Beep Duration” on page 2-61.
Backlight intensity - Displays a screen for setting the intensity of the
Local Panel backlight. Requires a Key Operator passcode. Refer to “Adjust
Backlight Intensity” on page 2-62
Audible alarm - Displays a screen from which you can:
• Enable or disable the audible alarm.
• Set the duration of audible alarm tone pulses.
The audible alarm sounds when the number of Jobs Waiting for Media goes
from 0 to 1 or when an Error Message screen is displayed. Requires a
Key Operator passcode. Refer to “Adjust the Audible Alarm” on page 2-63
Passcodes - Displays a screen for entering and editing passcodes
Requires the Service passcode. Refer to “Local Panel Passcodes” on
page 2-57.