User's Guide

2-54 7F3319 September 30, 2004
Operation and Maintenance
2. Touch Calibrate Film.
3. Touch Yes then OK.
The Imager will print a calibration film before printing any jobs in the
print queue that have not yet started printing and will interrupt a
multi-sheet print job to run a calibration print.
Requesting a Density Test The Imager can print an internally generated density test print with a SMPTE
pattern. Density test prints are often used as a quality assurance tool to
verify the uniformity of films printed by the Imager.
To request a SMPTE test print:
1. Start from the Home screen.
2. Touch the Film Supply button.
Film Supply Button