User's Guide

2-58 7F3319 September 30, 2004
Operation and Maintenance
Setting Up Passcodes Key Operator Passcodes and the Service passcode are set up on the
Passcode Entry screen. Each passcode must be accompanied by a User ID.
Only a user with the Service passcode can enter Key Operator passcodes or
change the Service passcode.
The Customer First passcode cannot be changed and is not displayed on the
Passcode Entry Screen.
Passcode Entry Screen
Logging On to the Local
Panel with a passcode
When a user selects a function on the Local Panel that requires a passcode,
a keypad appears for entry of a User ID. A second keypad appears for a
Passcode. After entering a valid User ID and Passcode, the user can access
all functions available for the type of password entered.
1
2
1 User IDs. Key Operator user names are the numbers 1-10 and
cannot be changed. The Service user name is always the number
99. User names 9, 10 and 99 appear on a second Passcode Entry
screen which appears when you scroll beyond user name 8.
2 Passcodes. Passcodes are numeric only and contain 6 digits. No
more than 2 consecutive digits can be the same. For example,
the passcode 224466 is acceptable. The passcode 222345 is not
valid.