User's Manual

User Guide
3-2
8599110 2001 March Rev. B
Format/Acquire/Print – DryView 8700/8500 Keypad
1. Set the imager power switch to ON.
2. On the keypad, press Copies to select the number of copies desired.
3. Press the appropriate Format key to select the desired format.
4. Press Acquire to acquire images.
5. After the images are acquired, press Print to place a print request in the print
queue.
Note
If the auto–print function is enabled, a print request is automatically placed in the
print queue after the last image in the format has been acquired (the Print button
does not have to be pressed).
Note
For the DryView 8700/8500 Keypad, the auto–print function is enabled or disabled
by service personnel during installation. The user cannot change this setting.