User's Manual

User Guide
3-6
8599110 2001 March Rev. B
Moving Stored Images – Kodak Keypad
The move function let you move a previously stored image to any available
non-stored position (i.e., any Store button with a green LED). To enable the move
function, press the Store button of the image you want moved. To complete the
move, press the Store button for the desired image position.
 The move function is exited as soon as the image is stored at its new location.
 To exit the move function without moving the image, press the image’s Store
button again (or press the Store button of any other stored image).
Erasing Stored Images – DryView 8700/8500 Keypad
Press Erase to erase images in reverse order, starting with the most recently
acquired image.
Erasing Stored Images – Kodak Keypad
Press Erase Image to enter Erase Image mode. While in Erase Image mode, any or
all stored images can be erased.
 To erase a specific image, press Store for that image. Once all the desired
images are erased, press Erase Image to exit the Erase Image mode.
 To erase all stored images, press Erase All Images on the Main Menu. After
erasing of the stored images, the keypad automatically exits Erase Image mode.
Note
When in Erase Image mode, the Erase All Images button is displayed in place of the
Format Menu button.