User's Manual

Operation and Maintenance
3-11
2001 March Rev. B 8599110
Replacing the Developer Filter
Kodak DryView Laser Imaging Film emits a slight odor when it is developed. The
developer filter absorbs and neutralizes this odor. As the filter ages, it becomes
slightly less effective. If odor becomes noticeable, replace the filter as follows:
1. Unlatch and open the filter housing.
2. Remove the old filter.
3. Install the new filter. See the instructions on the filter package.
4. Close and latch the filter housing.
Filter
Figure 3-4. Replacing the Developer Filter