User's Manual

Troubleshooting
4-13
2001 March Rev. B 8599110
Manually Closing the Film Cartridge
The imager automatically closes the film cartridge when Supply is pressed, when
the cartridge is empty, and when film jams occur in the expose or transport areas. If
the imager cannot close the cartridge, a P177 error message is displayed.
Note
If doors are opened when the film cartridge is open, the top sheets of film will be
exposed. To minimize the number of exposed sheets, darken the room before
opening the doors.
Press and hold Supply for five seconds to unlock the left door and supply door. If
the imager cannot unlock the door(s), use their mechanical releases (refer to
page 4-14).
To close the cartridge, turn the rollback knob counterclockwise.
Rollback Knob
Figure 4-7. Manually Closing the Film Cartridge