User's Manual

Technical Information
6-5
2001 March Rev. B 8599110
Archivability of Developed Film
DryView Laser Imaging film has been tested and can be archived for more than 100
years when stored at American National standards Institute (ANSI) recommended
storage conditions (77°F/25°C). Developed films may be stored at higher
temperatures, however, that may reduce the number of years the film can be stored.
For example, storing films at a constant elevated temperature of 90°F/32.2°C may
reduce archive capability to 30 years.
Exposure to Moisture
While moisture can damage traditional wet processed silver halide films, DryView
Laser Imaging films typically withstand humidity, spills, and other forms of water
without any significant effect on image quality or film integrity. If needed, films can be
cleaned with a clean, damp cloth.
Odor Dissipation
The “wet” chemistry associated with the development of silver halide film creates
strong, unpleasant odors. By eliminating “wet” chemistry, Kodak DryView
technology eliminates virtually all of these odors. While some low-level odors are
produced during the development process, they pose no known adverse health
risks. Processing odor levels are further reduced by a non-hazardous, recyclable
filter in DryView Laser Imaging systems. This filter traps most low-level odors and
prevents them from dissipating into the work environment. To help maintain optimum
performance, the filter requires periodic replacement as specified in the DryView
Laser Imager User’s Manual. Unlike silver halide systems, DryView Laser Imagers
require no special venting.
Heat Dissipation
DryView Laser Imaging systems use a controlled amount of heat to develop
DryView Laser Imaging films. The heat has virtually no effect on the air temperature
of the work area. The amount of heat dissipated into an area during a day is typically
less than the heat generated by four 100-watt light bulbs.