User Manual
Table Of Contents
- System Power Up and Power Down
- Shut Down
- Using the Touch Screen Local Panel
- Status Screen
- • Film size appears in the upper left corner.
- • Film base type appears in the lower left corner.
- • Current number of film sheets available appears on the right
- Operation
- Opening the Front Door
- Opening the Film Drawers
- Film Drawers and Front Door Manual Override Latches
- Opening the Hood
- Loading Film Cartridges
- 1. At the Door Control or Status screens, touch the desired film drawer icon. The laser imager cl...
- 2. Pull the film drawer out to its furthest extension.
- 3. To remove a film cartridge, hold the edge of the cartridge and lift the cartridge out of the d...
- 4. To load a new or different cartridge, insert the cartridge into the film drawer with the perfo...
- 5. Slide the drawer into the laser imager.
- Recycling Empty Film Cartridges
Operation and Maintenance
June 12, 2003 5E6155 3-8
System Functions Screen
System Functions
2
1
3
4
5
1 Sorter (Enabled/Disabled). When touched, the sorter is
enabled or disabled. When disabled, the laser imager sends all film
to bin 1.
2 Audible Alarm (Enabled/Disabled). When touched, the
audible alarm for error and status messages is enabled or disabled.
3Print. When touched, the system prints the selected test print
(Calibration test print or Density test print).
4 Density test print. When touched, the laser imager prints a Density
test print from the selected film drawer and at the selected density
(default 3.0).
5 Calibration test print. When touched, the laser imager prints a
Calibration test print from the selected film drawer.