User Manual
Table Of Contents
- Warranty and Limitation of Liability
- Important Notice to Purchaser:
- Important Notice to Purchaser: 5
- 1 Safety and Related Information
- 2 Overview
- 3 Operation and Maintenance
- System Power Up and Power Down 3-1
- Using the Touch Screen Local Panel 3-4
- Operation 3-13
- Operator Maintenance 3-19
- Key Operator Information 3-22
- 4 Troubleshooting
- 5 Specifications
- 6 Film Technical Information
- Glossary
- 1 Safety and Related Information
- Safety, Warnings, and Cautions
- Safety and Health Compliance
- Kodak DryView 8900 Laser Imager
1-8 5E6155 June 12, 2003
Safety and Related Information
2 Hazardous Voltage. This label warns operators that high voltage
is present under panels where the label are attached. Only Kodak
Authorized Service Providers should attempt access.
3 Static Sensitive Equipment. This label identifies static-sensitive
components. Connect a personal grounding strap to appropriate
ground before servicing this laser imager. Only Kodak Authorized
Service Providers should service the laser imager.
4 Class I Laser. This label indicates that the laser imager complies
with IEC requirements for Class I systems.
5 Radio Frequency Energy. This label indicates that the laser
imager can radiate radio frequency energy. If not installed and
used in accordance with the instructions, the laser imager may
cause harmful interference to radio communications.
6 Manufacturer Identification. This label indicates the product
name, manufacturer’s name, importers name, and license
number.