User Manual
Table Of Contents
- Warranty and Limitation of Liability
- Important Notice to Purchaser:
- Important Notice to Purchaser: 5
- 1 Safety and Related Information
- 2 Overview
- 3 Operation and Maintenance
- System Power Up and Power Down 3-1
- Using the Touch Screen Local Panel 3-4
- Operation 3-13
- Operator Maintenance 3-19
- Key Operator Information 3-22
- 4 Troubleshooting
- 5 Specifications
- 6 Film Technical Information
- Glossary
- 1 Safety and Related Information
- Safety, Warnings, and Cautions
- Safety and Health Compliance
- Kodak DryView 8900 Laser Imager
Safety and Related Information
June 12, 2003 5E6155 1-9
Processor Drum Cover Label
NEW LANGUAGE:
NEW LANGUAGE:
NEW LANGUAGE:
Do not touch, Hot surface!
Do not touch, Hot surface!
Do not touch, Hot surface!
ATTENTION :
Surface Chaude, Ne pas toucher!
ACHTUNG:
Nicht anfassen, Heisse Oberflache!
ATTENZIONE:
Non toccare,Superficie Calda!
CAUTION:
Do not touch, Hot surface!
ADVERTENCIA:
No tocar, Superficia Caliente!
OPGEPAST:
Niet aanraken, Heet Oppervlak!
1
3
2
4
5
1 Processor drum cover pictogram. This pictogram illustrates the
processor drum cover open. When open, the operator needs take
take caution avoiding heat and use of sharp objects.
2 Caution - hot surface pictogram. This label warns operators to use
care near the processor drum to avoid possible burns.
3 Caution - no sharp objects pictogram. This label warns operators
to avoid using sharp objects near the processor drum.
4 ISO label warns operators to use care near the processor drum to
avoid possible burns.
5 ISO label identifies a possible warning or caution and indicates
applicable information in the User Guide.