User Manual

1-12 5E6155 June 12, 2003
Safety and Related Information
Europe
This Class A digital apparatus meets all requirements of the Canadian
Interference – Causing Equipment Regulations.
EN55011 (CISPR 11) Class A Group 1: Limits and Methods of Radio
Interference Characteristics of ISM Equipment.
European Telecommunication Standard (ETS) EN 300 330 :
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short
Range Devices (SRD); Technical Characteristics and Test Methods for
Radio Equipment in the Frequency Range 9 kHz to 25 MHz and Inductive
loop Systems in the Frequency Range 9 kHz to 30 MHz.
European Telecommunication Standard (ETS) EN 300 683 : Radio
Equipment and Systems (RES) ; ElectroMagnetic Compatibility (EMC)
Standard for Short Range Devices (SRD) operating on frequencies
between 9 kHz and 25 GHz.
EN61000-3-2 (IEC 61000-3-2): Electromagnetic compatibility (EMC) -
Part 3: Limits - Section 2: Limits for harmonic current emissions
(equipment input current <= 16 per phase).
EN 61000-3-3 (IEC 61000-3-3): Electromagnetic compatibility (EMC) -
Part 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in
low-voltage supply systems for equipment with rated current <= 16 A.
EN 61000-4-2 (IEC 61000-4-2): Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques - Section 2: Electrostatic
discharge immunity test.
EN 61000-4-3 (IEC 61000-4-3): Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques - Section 3: Radiated,
radio-frequency, electromagnetic field immunity test.
EN 61000-4-4 (IEC 61000-4-4): Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques - Section 4: Electrical fast
transient/burst immunity test.
EN 61000-4-5 (IEC 61000-4-5): Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques - Section 5: Surge immunity
test.