User Manual

4-4 5E6155 June 12, 2003
Troubleshooting
Lid” on page 4-17.
Number Message display Message Details Operator Action
02-104 Inadequate Disk Space for
New Job
Too many undelivered jobs
are queued.
1. Delete jobs in the
Undelivered Queued.
2. Load requested media for
jobs in Pending Queue.
03-111 Undelivered Job due to
Rendering Error
Job failed because of bad
image data.
1. Delete job from the
Undelivered Queue.
20-208 Front Door Failed to Open Jobs will continue to be
queued. Film affected by the
error will be reprinted.
1. Open the door manually.
2. If the error persists, call
Service.
20-914 Internal Image Data
Transfer Failed
Jobs will continue to be
queued. Film affected by the
error will be reprinted.
1. Restart the laser imager.
2. If the error persists, call
Service.
20-915 Internal Image Data
Transfer Failed
Jobs will continue to be
queued. Film affected by the
error will be reprinted.
1. Restart the laser imager.
2. If the error persists, call
Service.
21-116 Film Jam in Area 1: Film
Pickup
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Open the drawer.
2. Close the cartridge to
prevent film from fogging.
3. Remove any film.
4. Close the drawer.
21-118 Internal Hardware Failure:
Film Pickup
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Restart the laser imager.
2. If the problem persists,
call Service.
21-119 Internal Hardware Failure:
Film Pickup
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Restart the laser imager.
2. If the error persists, call
Service.
21-120 Internal Hardware Failure:
Film Pickup
Jobs will continue to be
queued. Printing will continue
from any other supply drawer.
1. Restart the laser imager.
2. If the error persists, call
Service.