User Manual

Troubleshooting
June 12, 2003 5E6155 4-21
3. Touch the front door icon. The front door opens.
4. Locate and remove the jammed film in the platen or vertical transport.
5. If the film is jammed in one of the feed roller sets, turn the rollback
knob in the appropriate direction to free the film.
6. Close the front door.
7. If you cannot clear the jammed film, call Service.
Clearing Film Jams from
Area 4
The film processor drum is Area 4. If film stalls in this area, an error
message occurs on the local panel.
Clearing Film Jam Area 4
1. The Film Jam in Area 4: error message appears.
2. Touch the Show Jam button. The Door Control screen appears and
the affected area is highlighted.
3. Open the upper hood to its first locking position.
CAUTION
:
Hot Surface. Drum and rollers inside the processor are hot.
Cover
Rollers
Drum
Lift handle
Clamps