User Manual

4-24 5E6155 June 12, 2003
Troubleshooting
6. Close the upper hood.
7. If you cannot clear the jammed film, call Service.
Clearing Film Jams from
Area 6
The sorter is Area 6. If film stalls in this area, an error message appears on
the local panel.
Sorter Knob
1. The Film Jam in Area 6: error message appears.
2. Touch the Show Jam button. The Door Control screen appears and
the affected area is highlighted.
3. Open the upper hood to its first locking position.
CAUTION
:
Hot Surface. Drum and rollers inside the processor are hot.
Exercise caution when working in the drum area.
4. Inspect the sorter rollers on the left side of the sorter. Remove any
film. If the film is jammed in one of the feed roller sets, turn the sorter
knob in the appropriate direction to free the film.
5. Tilt the sorter backward to access the inside area of the sorter:
Release button