User's Manual

Setting up for wireless operation
8 www.kodak.com/go/easysharecenter
Available wireless networks are listed.
Tap Back to dismiss the screen and connect later.
Later—To connect later, tap Home
→ Settings → Network → Scan for
wireless networks. Then follow the screen prompts and continue with step 2 below.
If your wireless network is not found, select Scan again. You may need to enter the
network SSID (sometimes called the network name) manually. The person who set
up your network can help you with this information. Or, tap Help me connect for
more information.
2 With your home network highlighted, tap OK to connect to your home network.
The Connecting... screen appears.
Or, select Exit without connecting and go to the Home screen (page 14).
Enter security key (if you have security enabled)
If you have wireless network security enabled, you are prompted to enter your
security key (WEP or WPA) on the on-screen keyboard. Slide along the bottom of the
NOTE:
If the scan finds multiple networks,
your home network (with the highest
% signal strength) is usually listed
first and highlighted.
Or, to select another network, slide or
tap below the arrows to highlight a
network, then tap OK.
FPO