Install Instructions

ManualsBrandsEasy Heat ManualsHeating SuppliesReplacement Temperature Sensor

Table Of Contents

GENERAL

The TS-1 sensor measures outside temperatures and

is placed in an area that best represents the outdoor

temperature conditions.

Each MSC-1 includes a TS-1 temperature sensor. The TS-1

operates on low voltage provided by the MSC-1 control

unit and allows the MSC to determine when to activate

snow-melting or de-icing equipment.

Easily afxed to a wall or fascia by 2 screws, the TS-1’s small

size and neutral colour allows the sensor to discreetly blend

with almost any background.

The TS-1 is supplied with 10' of connection wire which may

be extended up to 500’ with an appropriately rated

18-20AWG 3 wire unshielded strandad cable.

The main components of the TS-1 are shown in Fig.1.

WARNINGS

1. This is not a “do-it-your-self” product. A qualied

electrician must install the TS-1.

2. If after carefully reading these instructions you still

have questions regarding installation, operation or

maintenance of this product, call the numbers listed

for assistance.

3. Prior to installation, check the TS-1 body enclosure or

wires for possible shipping damages. Do not install a

damaged TS-1 controller.

4. All heating equipment, controls and associated systems

must be installed in compliance with the latest editions

of all applicable electrical codes and ordinances.

5. These instructions must be saved and made available

to owners or users of this product and/or transferred to

future owners.

6. The TS-1 has been designed for the sole purpose of

connection to an EasyHeat MSC-1 Control Panel. The

risk of re or electric shock exists if the TS-1 is connected

to any device other than an MSC-1 Control Panel.

8. Mount the TS-1 in an area free of obstructions such as

trees, shrubs, etc. to prevent any damage to the sensor.

9. Avoid excessive shock or vibration.

10.

Do not install an TS-1 Sensor when the ambient

temperature is colder than 32°F (0°C). Installing the sensor

below this temperature will damage the connection wire

and result in the risk of re or electrical shock.

TS-1

Temperature Sensor for MSC-1 Panel for Snow & Ice Melting

Installations & Operation Instructions

Clearance

for #8

screws

Figure 1

10´ Connection Wire

TS-1

Housing

Summary of content (4 pages)

PAGE 1
TS-1 Temperature Sensor for MSC-1 Panel for Snow & Ice Melting Installations & Operation Instructions GENERAL Figure 1 The TS-1 sensor measures outside temperatures and is placed in an area that best represents the outdoor temperature conditions. TS-1 Housing Each MSC-1 includes a TS-1 temperature sensor. The TS-1 operates on low voltage provided by the MSC-1 control unit and allows the MSC to determine when to activate snow-melting or de-icing equipment.
PAGE 2
TS-1 Installations & Operation Instructions INSTALLATION INSTRUCTIONS 1. 2. 3. Mount the TS‑1 securely to a wall or fascia by 2 No.8 screws. Mount in a location that has the same weather conditions as the snow and ice melting zones. Avoid direct sunlight or warm exhaust vent areas as this may cause erroneous temperature readings. The unit is water-resistant, but it is not designed to be submerged or immersed in water.
PAGE 3
TS-1 Installations & Operation Instructions OPERATION INSTRUCTIONS The TS‑1 temperature sensor provides the MSC‑1 control panel with the temperature information necessary to determine if snow or ice conditions exist. The TS‑1 may be tested for functionality by simply observing the temperature indicated on the MSC‑1 display, display temperature should match sensor ambient temperature.
PAGE 4
TS-1 Installations & Operation Instructions LIMITED WARRANTY Easy Heat warrants that if there are any defects in material or workmanship in any heating cable or accessory during the first year after the date of purchase. We will provide new products to replace any defective items, or we will refund the purchase price paid for the accessory or cable, not including any labor or other installation costs.