SDS

D8330611 v4.0
Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM
13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.
:
Disposal methods
14. Transport information
8
Limited quantity
Yes.
Packaging
instruction
Passenger aircraft
Quantity limitation: 0.5
L
Cargo aircraft
Quantity limitation: 2.5
L
Special provisions
A6, A7, B10, T14,
TP2, TP27
DOT Classification
Corrosive liquids, n.o.
s. (sodium hydroxide,
2-aminoethanol)
III
Regulatory
information
UN number
Proper shipping
name
Classes
PG*
Label
Additional
information
UN1760
10/14
02/05/2018
Date of issue
:
SDS #
8327965_D8330611
(NA)
:
Code #
D8330611 v4.0
: