Instruction manual

LED Display

All important actions and operating conditions are indicated by the LED display

and are intended to contribute to ﬁnding the causes of failures and operating

errors. The following table lists the meaning of the individual signals.

Status messages:

Further Information

green red green red Display Action

Flashing rapidly Programming mode

Mastercode 1 & 2

Every 3 seconds Blocking time (one minute)

is active. Wrong Code

entered four times

1 second Key entry

1 second Abort key (“X”) pressed

LEDs ﬂash in turn three

times

Handling error, the rotary

knob was not operated

within the released period

Alternate Waiting for rotary knob to

be operated

1 second Lock has been locked /

programming successful

2 seconds Lock has been unlocked

1/2 second Code accepted

3 seconds Internal malfunction / lock

may have to be replaced

Red LEDs light up ﬁrst,

then the green LEDs, for

1/2 a second in each case

Blocking triggered by

MasterCode 1, cancelled

by means of MasterCode 2

LEDs ﬂash together three

times

Code entry rejected, as

blocking by MasterCode 1

active

LEDs ﬂash together twice Warning: battery replace-

ment is required shortly

LEDs ﬂash in turn three

times

Battery must be replaced

immediately; lock can no

longer be operated

LEDs ﬂash three times MasterReset carried out