Owner`s manual

SET Key is used to enter the Main Menu (programming mode.) You

may be required to enter a password to access programming mode.

Numeric Keys (0 to 9) are used to enter numeric data like tares, prices,

pieces, etc.

Func. Key is used to void sales transactions.

ESC Key is used to enter Sales mode whenever you are at the Main

Menu; otherwise, it will backtrack through the menu system.

PRE-PACK Key is used to turn Pre Pack mode on or off. When Pre

Pack mode is on, the scale will auto-print and NOT auto-clear tares

and/or unit prices; when off, the scale will NOT auto-print and will auto-

clear tares and/or unit prices.

PLU Key is used to call-up PLUs by number.

X Key is used to print copies of labels (multiple labels.)

FOR Key is used for pricing By Count PLUs.

C Key is the Clear key and is used to clear numeric entries. If you

press Clear when the cursor is on a text field, then all text to the right

of the cursor will be erased.

FEED Key is used to feed out labels so that the printer can be properly

aligned. Whenever labels are fed out, a test pattern is also printed on

them so that the user can determine if the print head needs cleaning or

servicing.

PRINT Key is used to manually print labels and also functions as an

“Enter” key during programming.

Speed Keys

The Alpha Keypad functions as Speed keys whenever you are in sales

mode. The LS-100 has 60 Speed keys that are programmable to

select any 60 PLUs you desire. By default, Speed keys 1 to 60 are

assigned PLUs 1 to 60 respectively.