Owner`s manual

19
free. With that in mind, please make sure that the power outlet used
with the LS-100 is a dedicated line with no high-noise devices (such as
compressors, motors, etc.) plugged into the same line. Also, make
sure that the wiring for the outlet is correct. If you are uncertain,
please contact a certified electrician or your Easy Weigh Dealer.
Additionally, the outlet must be a 3-prong outlet with a properly wired
safety ground. NEVER remove the 3
rd
prong from the LS-100 AC cord
or use a 3-to-2 adapter. Failure to follow any of these precautions can
result in severe electrical shock.
Be sure to check the LS-100 Specification Plate located on the left side
of the scale. The power supply specifications are listed there.
Quick Start
To get started immediately, follow the instructions in the “Easy Weigh
LS-100 Quick Reference Guide” that is included with your scale. We
still recommend that you read this manual at least once. The Quick
Reference Guide states the following:
A. Basic setup:
1. Take the scale, pole display, platter, and accessories bag
out of the box.
2. Install the pole display: Note
: Make certain that none of
the wires are being crimped when you are installing the
pole display.
a. Connect the display connectors together.