Owner`s manual

28
Password Change
You can change the password to any 4 digit number you want. The
initial password is “0000”; four zeroes. If your scale has password
protection disabled or you wish to disable password protection, you
must contact your Easy Weigh Dealer to change this feature.
Changing this feature is only permitted by licensed individuals.
Do not forget your password; write it down somewhere safe. If you
forget your password, you will NOT be able to access the scale; the
only way to correct this problem is to call your Easy Weigh Dealer who
may have to clear out ALL of the scale’s memory and completely
reprogram the scale, which may or may not incur additional charges.
To change the Password:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
8
9
1
.
3. Type your new password and press
PRINT
.
4. Re-type your new password and press
PRINT ESC SET
.
5. You are back in the Initial State.
Miscellaneous PLU Programming
The scale has a Miscellaneous PLU that can have 2 lines of 56
characters per line of Commodity Name or message and a 6 digit UPC
code; however, most label formats support only 28 characters per line.
To program the Misc. PLU:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
3 3
.
3. You can now type the Commodity name or Message for Line
1 of the Misc. PLU. As you type, you will see the text in the
Alpha Display.
4. When you are done with line 1, press
PRINT
.
5. Type the data you want for line 2 and press
PRINT
2 times.
6. Type the UPC code you want for the Misc. PLU and press
PRINT ESC SET
.
7. You are back in the Initial State.