Owner`s manual

31
To Create or Edit PLUs:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
1
. The displays will show:
PLU - 0. PLU Number
3. Enter the PLU number you wish to create or edit. As you type
the PLU number, you will see it in the Total Price display. The
default PLU number in the Total Price Display (“0”) can change
after you program several PLUs. The default value is usually
the next available (new) PLU number.
4. Press
PRINT
to go step 5 or press
ESC SET
to exit PLU
Create & Edit and go back to the Initial State.
5. The next screen is PLU Type selection. Press
1
for By
Weight or
2
for By Count.
PLU - 1. PLU Type
1.By Weight 2.By Count
6. The next screen is the Commodity Name Line 1. This is the first
line of your PLU name descriptor. It can be up to 56 characters
long; although, most label formats have a 28 character limit.
Type the commodity name you want for line 1. The screen
appears as follows:
PLU - 2. Commodity Name- 1
[GROUND BEEF ]
7. You can press
SAVE
to store the PLU as-is and go to step 28
or you can press
PRINT
to continue to step 8.