Owner`s manual

32
8. The next screen is the Commodity Name Line 2. This is the
second line of your PLU name descriptor. It can be up to 56
characters long; although, most label formats have a 28
character limit. Type the commodity name you want for line 2.
The screen appears as follows:
PLU -
2
. Commodity
N
ame-
2
[
9
8% LEAN ]
9. You can press
SAVE
to store the PLU as-is and go to step 28
or you can press
PRINT
to continue to step 10.
10. The next screen is the Group Code. This is where you assign
the PLU to a group. Enter the group number you want; it must
be from 1 to 99. As you type, the number will appear in the
Total Price Display. The screen appears as follows:
PLU -
3
. Group Code
11. You can press
SAVE
at to store the PLU as-is and go to step
28 or you can press
PRINT
to continue to step 12.
12. The next screen is the UPC Code. This is where you assign a
UPC number to the PLU. The UPC Code defaults to be the
same as the PLU number. Enter the UPC number you want; it
must be from 0 to 999999. As you type, the number will appear
in the Total Price Display. The screen appears as follows:
PLU - 4. UPC Code
13. You can press
SAVE
to store the PLU as-is and go to step 28
or you can press
PRINT
to continue to step 14.