Owner`s manual

33
14. If you are creating a By Weight PLU, go to step 16. This is
where you assign Piece count to a By Count PLU. The Pieces
value defaults to be 1. Enter the number of pieces you want; it
must be from 1 to 99. As you type, the number will appear in
the Total Price Display. The screen appears as follows:
PLU - 5. Pieces
15. You can press
SAVE
to store the PLU as-is and go to step 28
or you can press
PRINT
to continue to step 16.
16. The next screen is the PLU Price. This is where you assign a
price-per-pound for a By Weight PLU or price-per-piece for a By
Count PLU. The price defaults to 0.00. Enter a price: the price
must be from 0.00 to 9999.99. If you enter 0.00, then you will be
able to change price during sales; if not, you may not be able to
change the price (see Advanced Programming, PLU Price
Change section.) The price will appear in the Total Price
Display.
By Weight By Count
PLU - 5. Price
PLU - 6. Price
17. You can press
SAVE
to store the PLU as-is and go to step 28
or you can press
PRINT
to continue to step 18.
18. The next screen is the PLU Shelf Life. This is where you assign
a Shelf Life in days that is used to compute the expiration date
(Sell By.) The shelf life defaults to be 0. Enter the shelf life you
want; it must be from 0 to 366. 0 will not print a Sell By Date, 1
will print Sell By Date = Packed On Date, 2 will print Sell By
Date = Packed On Date + 1, etc. As you type, the shelf life will
appear in the Total Price Display.