Owner`s manual

35
23. You can press
SAVE
to store the PLU as-is and go to step 28
or you can press
PRINT
to continue to step 24.
24. The next screen is the PLU Ingredients Line 1. There are 10
lines of ingredients and 56 characters per line for a maximum
total of 560 characters of ingredients per PLU. Type the
ingredients you want for line 1. As you type, the ingredients will
appear in the Alpha Display. The screens appear as follows:
By Weight By Count
PLU - 8. Ingredients - 1
[SALT,SUGAR,FLOUR,WATER,W]
PLU - 9. Ingredients - 1
[SALT,SUGAR,FLOUR,WATER,W]
25. You can press
SAVE
to store the PLU as-is and go to step 28
or you can press
PRINT
to continue to step 26.
26. The next screen is the PLU Ingredients Line 2. You can type the
ingredients you want for this line and press
PRINT
to go to the
next line of ingredients and repeat this step until you get to Line
10. Once you get to line 10, you can type the ingredients and
then go to step 27. You could press
SAVE
at any time to store
the PLU as-is and go to step 28.
27.You can press
PRINT
to save the PLU and return to step 3 or
you can press
SAVE
to go to step 28.
28. The scale will store the PLU, print a Verification Label and then
return to step 3.
Note
1
: You can also use the
S
and
T
keys to navigate
through PLU programming. Pressing
S
is used to backup 1 step.
Note
2
: You can press
ESC
at any time during PLU programming in
order to exit. If you press
ESC
, you will come to the following
screen:
Save Changes?(Y/N)
_