Owner`s manual

38
4. If the PLU you selected is By Weight then go to step 6. The Unit
Price and Total Price displays will show the current Piece count
of the selected By Count PLU.
5. You can type a new Piece count and press
PRINT
to store the
new Piece count and go to step 6 or press
ESC ESC
SET
to go back to the Initial State.
6. The Unit Price and Total Price displays will show the current
price of the selected PLU.
7. You can type a new price and go to step 8 or press
ESC
ESC SET
to go back to the Initial State.
8. The Total Price Display will show the new price while the Unit
Price Display continues to show the current price. Press
PRINT
to store the new price and go to step 3.
Deleting PLUs
The LS-100 can store up to 1000 PLU. Although this is enough for
most applications, there may come a time that you might want to
delete some PLUs to remove unused or erroneous PLUs. You can
only delete 1 PLU at a time. To delete ALL PLUs see Advanced
Programming, Deleting All PLUs section.
To Delete PLUs:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
8
7
.
3. Enter a PLU number to delete and press
PRINT
.
4. If you are done, press
ESC SET
; otherwise, press
7
and go back to step 3.
When finished, the scale will be in the Initial State.