Owner`s manual

47
4. As you type, the number will appear in the Total Price Display.
Press
PRINT
. Now select the last (ending) PLU number for your
list. The Unit Price Display will show the starting PLU number
and the Total Price Display will show the ending PLU number.
When the scale prints the labels, it will NOT wait for you to take
them before it prints out the next one; therefore, we recommend
that you do not thread the backing paper to the pick-up spool for
this operation. Instead, have the backing paper feed out with
the labels as they are printed so that they do not “peel-off.”
When you are ready to start printing, press
PRINT
.
End PLU No
5. The scale will sequentially go through every PLU in the range
that you specified and print out a verification label for those
PLUs that it finds.
6. Once the scale is finished printing, press
ESC SET
to exit
and return to the Initial State.
Deleting All PLUs
If you want to start with a fresh PLU list you can clear the entire PLU
memory. Be careful when you do this because you CANNOT recover
the PLUs once you delete them.
To delete ALL PLUs:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
8 8
.
3. Press
1
to delete all PLUs or press
0
if you changed
your mind and do not want to delete the PLUs.
4. Press
ESC SET
to exit and return to the Initial State.