Owner`s manual

52
Clearing preset tares:
Sometimes you may want to temporarily remove the preset tare of a
PLU. You can only do this ONLY if you set the Allow Temporary Price
Changes Setting to allow price changes:
1. Start from the Initial State.
2. Follow the instructions for Calling Up a PLU
3. Press
C TARE
, then reenter the PLU price.
The PLU will have no tare until the PLU is cleared.
The Save Key
You can use the
SAVE
key to prevent the Auto Clear Function (ACF)
from working. The ACF automatically clears a PLU, tare, or unit price
whenever the scale returns to gross zero.
Auto Clear Function, By Weight:
1. Start from the Initial State.
2. (Optional) Enter a tare.
3. Type a price or call up a By Weight PLU.
4. Place an item on the scale so that the Total Price > 0.00.
5. Once the Stable Lamp is on, remove the item from the platter.
6. The PLU and/or the unit price and tare (if any) are automatically
cleared.
Auto Clear Function, By Count:
1. Start from the Initial State.
2. Call up a By Count PLU with a Unit Price > 0.00.
3. Press
PRINT
.
4. If the Total Price > 0.00, the scale will print a label and the PLU
and is automatically cleared.
Whenever you wish to use the same tare, price, or PLU for many
transactions you may want to use the
SAVE
key. The
SAVE
key
does not automatically print, it only prevents ACF from happening. If
you want to also automatically print you can use the
A
UTO
key in
conjunction with the
SAVE
key, or use the
PRE PACK
key instead.