Owner`s manual

56
The For Key
The
FOR
key is used to toggle between the Piece count and the
Price for By Count PLUs. It is also used to convert By Weight PLUs
into By Count PLUs.
To use the For key with By Count PLUs:
1. Start from the Initial State.
2. Call up a By Count PLU.
3. (Optional) If you type any value or press the
C
key, only
the Piece count value in the Unit Price Display will change.
4. Press
FOR
.
5. (Optional) If you type any value or press the
C
key, only
the blinking Price value in the Total Price Display will change.
6. Press
FOR
. Goes back to step 3.
To use the For key with By Weight PLUs:
1. Start from the Initial State.
2. Call up a By Weight PLU.
3. Press
FOR
.
4. The By Weight PLU temporarily turns into a By Count PLU;
however, if you want the Net Weight Statement to print then you
must place the By Count item on the platter so that it can be
sampled. This is also true for By Count PLUs programmed with
Net Weight = 0.
5. Go to step 3 of “To use the For key with By Count PLUs.”
The Feed Key
The
FEED
key is used to feed out labels from the printer. You can
use the
FEED
key at any time in Sales mode. To use the
FEED
key
just press it at and a label will be issued immediately.
Whenever you move or remove the cassette drawer mechanism from
the printer bay, you should always use the
FEED
key to align the
labels after you securely replace the cassette drawer mechanism. You
should always press the
FEED
key 2 or 3 times to align the labels.