Owner`s manual

X: PLU Sales

When you perform a PLU Sales Report, the scale will print a report on

active PLUs or the ones you specify. Active PLUs are PLUs whose

“sales > 0.00”. This report is an X report because it does not clear the

sales data. Reports can print on any style labels; however, some

labels may require the use of more than 1 label per group reported.

To generate the PLU Sales Report:

1. Follow steps 1 to 3 of entering Main Menu.

2. Press

3. Enter the PLU number you want a report for (1 to 999999 or 0

for all active PLUs) and then press

4. The scale will print the report. When the scale is done printing

press

ESC

SET

to return to the Initial State or, go to

step 3 if you want a report for another PLU.

Below is an example of a PLU Sales Report which is printed on a blank

label:

PLU Reports explained:

The 1

line contains the PLU

name. The 2

line contains

the report name. The 3

line

contains today’s date and the

scale number of the scale that

generated this report. The 4

line contains the dollar amount

sold for this PLU. The 5

line

contains the number of

transactions for this PLU. The 6

line contains the total weight sold for

this PLU (By Weight) or the total pieces sold (for By Count.) The 7

line contains the group number. The 8

line contains the date of the

last time the Z report was taken. The Z report clears the sales records;

therefore, this sample report is reporting on the sales period of

07/12/02 to 07/26/02. The Active PLUs report contains sales data for

the Miscellaneous PLU.