Owner`s manual

Assembling the Display

Once you have unboxed your LS-100 you must carefully follow the

instructions below on how to assemble the Pole Display.

Installing the Pole Display:

1. Connect the display connectors together.

2. Place the Pole Display properly into the bracket making sure

that the connectors are slipped inside of the pole (upwards.)

3. Attach the two display pole screws (Pan Screw M4x8) to

securely fasten the pole to the bracket.

4. Finally, attach the bracket-plate to the bracket and fasten it

with the 4 smaller screws (Pan Screw M3x6).

Note

: Make certain that none of the wires are being crimped when you

are installing the pole display.

Scale Overview

The LS-100 is a simple price computing label printing scale. There are

certain parts of the scale that you may need to become familiar with in

order to properly maintain and operate the scale.

Take a look at the diagrams provided and the table following them.

These will point out the most vital components of the scale that are

involved in day-to-day operations and maintenance.