Specification Sheet
EL-USB-2-LCD
Humidity, Temperature and Dew Point Data Logger with LCD
www.lascarelectronics.com
Lascar’s EasyLog USB control software is supplied free of charge with each data logger. Easy to install and use, the control software runs
under Windows 2000, XP, Vista & 7. The software is used to set-up the data logger as well as download, graph and export data to Excel.
The software allows the following parameters to be congured:
• Logger name
• °C, °F
• Logging rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr)
• High and low alarms
• Immediate, delayed and push-to-start logging
• Display off, on for 30 seconds after button
press, or permanently on
• Data rollover (allows unlimited logging per ods
by overwriting the oldest data when the memory
is full)
The latest version of the control software may be downloaded free of charge from
www.lascarelectronics.com
Specications liable to change without prior warning Issue 7 07/2012 S.L Applies to EL-USB-2-LCD Page 2 of 5
DISPLAY AND STATUS FUNCTIONS
The EL-USB-2-LCD features a high contrast LCD and two bi-colour LEDs. The LCD shows logged temperature and humidity values using seven
segment numbers, along with annunciators. The LCD can also show information regarding the logging status.
Temperature
scale
Relative Humidity
symbol
Minimum logged
value symbol
Maximum logged
value symbol
Reading
Negative symbol
The LCD shows six different recorded readings, which can be cycled through using the built-in push button. The most recent logged value,
maximum logged value and minimum logged value can be displayed separately for humidity and temperature. In addition, logging and alarm
status is shown using two high intensity LEDs.
EL-WIN-USB (CONTROL SOFTWARE)