Quick Start Manual

QFSE-E-A1 1
IP Camera Quick Installation Guide
1.Hardware Connection
This IP Camera and its software are designed for WindowsXP / Vista / Windows7. Please follow
these instructions to install and use your new device.
a) Connect the IP Camera to your router via standard RJ45 network cable, and plug it into the
mains supply. Your computer should be connected to the router.
b) Position the IP Camera in a suitable location.
2. Access IP Camera Via Web browser
a)
Insert the software disc into your computer, it will run automatically and the interface will pop
up as picture 1,double click ‘Search IP Camera ’, select ‘Advance Mode’ to set the IP Camera.
(Picture 1) (Picture 2)
b)
Keep the gateway, DNS server, IP address of the IP camera synchronous with the current
computer, if not, click ‘update’ to finish the setting, then click open via inner access.
Inner Access refers to the LAN access address; Outer Access refers the WAN access address.
(refer to picture 3)