1. Products Introduction .................................................................................................................... 2 1.1. Specifications ..................................................................................................................... 2 1.2. Applications ....................................................................................................................... 4 1.3. System Requirements ...............................................................
English EasyN IP Camera User Manual 1. Products Introduction An IP Camera is a new-generation product combining an analog camera & IP video technology. Not only having the full functions of an analog camera, an IP camera can also compress and encrypt video and audio signal through internet by sending them to remote terminals with its built-in processor and web server. Via its IP address, users can use standard PC IE browser to view IP camera, monitor targets in real time, manage and store video or image.
EasyN IP Camera User Manual English Image Compression Format Standard M-JPEG Sensor CMOS，300,000 pixel Image Resolution Rate VGA（640x480）/QVGA（320x240） Network interface RJ-45/10-100 Base T ，802.11b/g Network protocol TCP/IP,FTP,SMTP,HTTP,UDP,DHCP,NTP,DDNS,UPNP,D NS,PPPOE Image Max Transmission Rate 30 frame/second（QVGA）, 15 frame/second（VGA） Alert control Output: 1 router（5VDC，0.
English EasyN IP Camera User Manual Please check if all of the below items are included in the package: Wireless IP Camera……………………………………………………………………1 Wi-Fi Antenna…………………………………………………………………………1 DC Power Supply……………………………………………………………………...1 CD……………………………………………………………………………...……...1 Manual………………………………………………………………………………....1 Mounting Bracket……………………………………………………………..……….1 Screws…………………………………………………………………………………2 NOTE: Contact us immediately if any of the above items is/are damaged or missing 1.3.
English EasyN IP Camera User Manual 2.1. Interface The back of a non-extended line IP Camera: Power Supply Light: constantly on when power is on Network light: constantly flashing which indicates data transmission when power is on. Ethernet interface: RJ-45 interface. I/O interface: 1 for alarm input, connect 3 & 4 these two terminals (input terminal grounding, low level effective trigger); 1 for TTL control input, connect 1& 2 these two terminals.
English EasyN IP Camera User Manual 2.2. Installation An IP camera processes image transmission on the network through the use of Internet technology, which offers DDNS function for static IP, dynamic IP and PPPoE dialing users. IP Camera can connect to outer net through LAN, which can also be connected directly. There are 3 commonly used network connections in IP Camera: 2.2.1. Installation in LAN. This is the most popular method for network access as long as there is a router.
English EasyN IP Camera User Manual 2.2.3. IP Camera & PC connection This method is not used frequently. If you process machine write parameter or program shift, we suggest you to use the first method to connect to the network to modify the machine parameter. Connect power to IP camera (note: make sure it is the correct power), video should be connected via internet cable to IP camera in a minute after the modification.
English EasyN IP Camera User Manual 3. IE Browse to IP Camera After the IP camera is connected to the PC LAN through a router, you can operate the IP camera via PC. To start, run the software that is in the CD given. 3.1. Use Finder Run the CD, double click file, and double click .
English EasyN IP Camera User Manual Before external net visit IP camera, port forwarding is necessary in the router, for more detail please refer to “Port Forwarding Settings in router “in 8.1 sections. Note： 1. Device information indicates IP camera information. 2. When the current computer has a fixed IP, (namely non-DHCP IP), and the IP camera is used for the first time, please click automatic setup, so the IP address of the IP camera, gateway and DNS can be the same with the PC. 3.
English EasyN IP Camera User Manual 2. Open the web page by clicking the ‘open’ button which is next to the inner visit address or outer visit address in the search bar, or you can directly input the inner or outer visit address in your browse, for examples, http: //192.168.1.126（LAN）, http: //dpvz.ipcam.hk（WAN）. 3. When connected through outer network, a log-in interface will appear: Enter the log in information, click OK to enter. An installation pop-up will appear.
English EasyN IP Camera User Manual 1. Default device account is admin, leave password blank. 2. M series IP camera doesn’t support Firefox browser, but F series does support Firefox browser. 3.3. Operation Keys After successful logged in, the video will be on the left side, and control buttons used for operations will be on the right side: 3.3.1. Equipment Status When login name or password is wrong, it will show the following hint: 3.3.2.
English EasyN IP Camera User Manual 3.3.3. Operation 1. Image mirror indicates a reverse image. 2. Resolution, mode, brightness, contrast default setting are: 320*240、50HZ、6、4， mode is mainly for the adjustment of Light strength, please adjust to 60HZ when lighting is poor or in dark. 3. There are 3 browse modes in IE mode: visitor, operator, and administrator. The authority of administrator is the highest. Log in as different authorities, the operation will be different.
English EasyN IP Camera User Manual 1）the right interface will indicate the parameter setting operation is successful, please click OK then refresh. 2) the right interface will indicate the parameter setting operation is successful, and need to reboot the IP camera to finish the setting, please click OK. Click yes (Y) to restart. 3.4.1. Device Information The device information includes the above interfaces, device serial number （MAC）、device system firmware version, device application firmware version.
English EasyN IP Camera User Manual 3.4.3. Device Clock Settings You can adjust time via NTP server or PC in this table. 3.4.4. Device User Settings User can proceed with setting in the interface as shown below. The system is available to administrator, operator, and visitor with different authority. Note: At least one administrator is required for the device; 3.4.5. Basic Network Settings This table is for DHCP and IP configuration. Port forwarding is needed.
English EasyN IP Camera User Manual DNS server, Http port; 3.4.6. Wireless LAN Settings There are 5 security modes regarding to the wireless networking setting: None, WEP, WPA Personal（TKIP, WPA Personal（AES）, WPA2 Personal（AES） and WAP2 （TKIP+AES）. Note: 1. To connect the internet through a wireless network, the camera SSID number must be the same with the wireless router and the SSID number of other AP device(s), 2. Our default camera SSID number is ‘dink’. 3.4.7.
English EasyN IP Camera User Manual 3.4.9. DDNS Settings All of the above information has been set up when the device is ready. Users generally do not need to make changes. In case of any accidental loss of information, user will need to re-obtain the domain name and fill it in himself. The user’s name is just the first four characters of the remote access. For example, if the IP address is http: //abcd.ipcam.hk, the user’s name is abcd. The password is DDNS.
English EasyN IP Camera User Manual sender email address is abc@163.com, enter ‘mail.163.com’. In general, SMTP port is 25. If the SMTP port need authentication, check the box and enter SMTP user name and SMTP password, which are provided by Email provider, and then test. Please check Report Internet IP by Mail if you want to provide the Internet IP in the email being sent. The e-mail server and other information can be obtained from the mail service provider.
English EasyN IP Camera User Manual 3.4.13. Reset/Firm Ware Upgrade This table is for camera firmware upgrade, it includes updating device system firmware and device application firmware. Be careful when you apply it! 3.4.14 Restore factory Settings If user(s) forget the password, the IP camera can be restored to the original ex-factory settings. When you click the key, a picture will pop up, Click ok, and wait for 1 minute, and then you can use the IP camera again. 3.4.
English EasyN IP Camera User Manual you can use the IP camera normally again. 4. Central Management System Please refer to the Central Management System User manual 5. Mobile Access 5.1. Smart phone Access Smart phones are the mobile phones with an operating system, such as Windows Mobile and Symbian. Due to its powerful function, the web page browser of such phones usually supports JavaScript. That’s why the phones can visit the dynamic pages of the IP camera through web page browser.
English EasyN IP Camera User Manual 2. Input the Username and Password of the device, and the following interface will appear. There are three log-in options. Click on the third “Sign in” and use Mobile Phone mode. ‘Language’: to select the display language. ‘Do not show next time’: When this option is selected, this interface will not appear when you log in next time. It will directly skip to the monitor image. Description for the monitor image: www.easyn.
English EasyN IP Camera User Manual Instruction for the Key Function: : Update: it is used to refresh the page. If the monitor picture is kept still, you may press this key to update the page. Up, down, left, and right: They are used to rotate the camera P/T. The camera without P/T does not have these keys. Stop: Stop rotating the camera The Download address of the mobile browser Opera mini: http://mini.opera.com. Please download the Opera mini browser according to the mobile model. 6. Others 6.1.
English EasyN IP Camera User Manual 3. Click “virtual server” in the unfolded menu. 4. Fill “80” under the right port start or port end, "192.168.1.50" under Server IP address, select "TCP/UDP"OR”“TCP” for protocol. Don’t forget to click “"save/apply”. After completing port forwarding, you can visit the IP camera through device code in outer net remotely; Default visit addresses for common used router are as followed: 1. TP-LINK ex-factory definition router address is 192.168.1.1 2.
English EasyN IP Camera User Manual wireless , indoor Infrared bullet camera ， waterproof wireless, infrared 20m Wireless, infrared 10 m， Audio， rotation P/T Level & vertical Cell indoor select infrared night vision 20 m Cell indoor overall rotation P/T ， 3.5” mini dome 7. Frequently Asked Questions Question: Why can’t I find the IP camera using the search bar? Answer: 1. Please check whether the IP camera and search bar are located in the same LAN network; 2.
English EasyN IP Camera User Manual Question: What are the models of cell phone support online viewing for the F series? Answer: Generally, cell phone with Java MIDP 2.0 program can watch dynamic video. Examples of cell phone models are NOKIA E71, 6122C MOTO A3000， NOKIA N70-73 N95 N98，Samsung U608 etc. Question: Why can’t I visit my IP camera through the cell phone software? Answer: 1. Please check whether the cell phone supports Java program； 2.
English EasyN IP Camera User Manual 8.2. Warranty Card Manufacturing Date: Inspector: Version number : Product Specification: Product Model Sale Dates User Company User name Customer Address Contact Number Date of Maintenance Conditions Failure Results of Maintenance Remark: Note: please fill in the card and submit it with products for repairing purposes www.easyn.
