User manual Owner's manual

English EasyN IP Camera User Manual
www.easyn.com
2
1. Products Introduction
An IP Camera is a new-generation product combining an analog camera & IP
video technology. Not only having the full functions of an analog camera, an IP
camera can also compress and encrypt video and audio signal through internet by
sending them to remote terminals with its built-in processor and web server. Via its IP
address, users can use standard PC IE browser to view IP camera, monitor targets in
real time, manage and store video or image. PTZ control is also available through
network.
Being a new member of the camera family, IP camera shares the same operation
functions with an analog camera, such as auto white balance, auto shutter speed, AGC,
auto backlight compensation etc. At the same time, an IP camera also supports remote
access through internet and multi-user visit. Some IP cameras are even able to extend
to both analog and digital signal.
F series IP camera‘s core is 32Bit RSIC. It adopts standard MJPEG compression
format. The camera sensor is CMOS which supports auto white balance and backlight
balance, enables IE, cell phone browser, and centralized monitor interface
management. In general, IP Cameras can have functions like audio simplex & duplex,
infrared, wired, wireless, POE, PZT, local storage. Therefore, there are hundreds of IP
Camera products to meet the requirements of different users.
1.1. Specifications
*- Use high performance, strong function media processor 32Bit RSIC
*- High Sensitivity sensor CMOS
*- Adopt optimized MJPEG video compression algorithm, making high-definition images
transmission in a narrow bandwidth possible;
*- Support maximum of 5 users viewing at the same time, no limitation of users if using
Forwarder Server function;
*- Built in Web Server， convenient for users to use standard browser for real time
monitoring and administration setting;
*- Support WIFI: 802.11b/g wireless networking;
*- Support remote system update;
*- Support DDNS analysis, support LAN & Internet (ADSL、Cable Modem)
*- Support a variety of network protocols: TCP/IP, UDP, SMTP, PPPoE, Dynamic
DNS, DNS Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g
*- Selected models support one/ two way audio talkback;
*- Support Motion Detection and alarm function (set area & sensitivity);
*- Support image snap
*- Abnormal automatic recovery function, if connect to the network automatically
when there is network interruption
*-Support mobile view
*- Selected models support 15 preset positions and change to preset positions when
alarm is active