Instruction Manual

ManualsBrandsEasyN ManualsComputer AccessoriesF3 Series PC

QF3E-CS-B11

F3 Series

Series

Series PC

PC Desktop

Desktop

Desktop Manual

Manual

一、 Hardware Installation ：

C onnect t he ip camera to the random distribution of professional power supply ； take the line ， one port to the ip

camera ， and another to the router ， and make sure that the router to access the Internet.

二、 Software download, install ation

Download links

：

http://f3.easyn.com

，

Or search the software from CD

Summary of content (9 pages)

PAGE 1
F3 Series PC Desktop Manual 一、Hardware Installation ： Connect the ip camera to the random distribution of professional power supply； take the line，one port to the ip camera，and another to the router，and make sure that the router to access the Internet. 二、Software download, installation Download links： http://f3.easyn.
PAGE 2
Select download “ IpcamF3-pc-soft.
PAGE 3
三、Add cameras: 1、 Camera label The label on the box: The label at the bottom of the camera: The content of the two labels are the same 2、open the file，add the camera ID to the software.
PAGE 4
Click “system”，enter into“Device List ” click“add”，and into the add page 4 QF3E-CS-B1
PAGE 5
device name name： User defined, such as the position of the input control device IP IP：blank ， 5 QF3E-CS-B1
PAGE 6
device port port：no need to modify， user name name：input amdin， Password Password: none password video video：select jpeg code stream， p2p p2p：enable it ， DID DID：input the Camera ID on the label, obj-001116-pekxy，（remarks：Do not distinguish text-transform，the first three is the letters, the Intermediate six is numbers, and the last five is the letters） Complete and accurate fill in as below shows: 6 QF3E-CS-B1
PAGE 7
Click on “confirm” after input , in the add frame "device" has display, and it also has display on the left side device list. It shows add succeed.
PAGE 8
四、Watch the camera video Left key select the Camera Name of the “device list”，and drag to display box，it shows the video.
PAGE 9
In the left border button: can control “PTZ, cruise, mirror, record, Snap-shot and Storage Path”etc，in the top r ight corner frame button，has “voice、talkback、record、snap-shot”etc.