F3 series wifi settings and password modify manual 1. Network and power line connection connect the camera to the random distribution of professional power supply;take the line,one port to the camera, another to the router, and make sure that computer and camera are in the same router. 2.download search software Download link： http://f3.easyn.
Decompress it after downloaded: 3.
Search the camera's IP address as above shows，Double click the address，it will open in the browser. User name：admin ，none password Select the first mode to login,and install the plugin according to the prompting.
Click on the "Settings" button It pops up a page，click on the "wireless LAN Settings"which the arrows point to: Click on the "search" to search the router wireless.
Search out the attachment router signal, then select your router's SSID: 5 WF3-CS-B1
Input your router's wireless password，click on the“settings” The camera is rebooting: After device rebooted,Pulled out line，Camera will connect the wireless router，shows settings succeed.
Password modify Click on “device users Settings” ，and enter the password modify page Default manager is admin,none password . Please input password and then click on the “settings” After device rebooted,password modify succeed.
Need input the new password to login the camera After modified this password ， when input camera ID information in computer software,need modify password. If forgetting the password ， restore to factory default settings ， click the reset button for 5s continuously when the power on.After reset succeed，camera user name is admin, none password .
