MH6E-E-A2
FORWORD This series product is integrated webcam focusing on network video monitoring, including wired box IP camera, wireless box IP camera, wired IR dome camera, wired waterproof IR IP camera, etc. The media processor of camera uses high-ability chip to realize audio/video capture, compression and transmission, the standard Motion-JPEG coding algorithm can confirm the clear and smooth effect of video transmission.
1 Product overview ...................................................................................................................... - 4 2 Product feature .......................................................................................................................... - 5 3 Device appearance and interface ............................................................................................... - 7 3.1 Device appearance .....................................................................
1 Product overview IP Camera integrates network function and web service function, it can send video record to anywhere through internet, and we can view real-time video of site via web browser. And it is suitable for many locations, such as large stores, schools, factories and homes, etc. IPCAM basic function of remote video data transmission is basis on MJPEG hardware compressive technology, the maximum speed of high-quality image transmission in LAN/WAN can reach 25fps.
2 Product feature ● powerful high-speed processor of video protocol ● high sensitivity and definition CMOS sensor ● 0.3 megapixels ● IR night version ● Optimized Motion-JPEG video compression algorithms to achieve narrow bandwidth high-definition image transmission ● multilevel users and password management ● support many browsers（IE browser，Firefox browser，Google browser, etc.） ● support wireless network(WiFi/802.
System feature System security Three levels account， password，multi-authority management Own dynamic IP domain name system（free） Built-in independent R&D DDNS system, lifetime free proprietary ddns, no need to apply DynDns, no worry about frequent offline problem, quickly connection. For example,http://demo.easyn.hk, the serial number is "demo" No need to install software, support IE multi-view, Mobile phone management, phone message on alarm, alarm picture platform（free） storage functions.
3 Device appearance and interface 3.1 Device appearance Picture 1- device appearance 3.2 Device interface Picture 2- device interface Power: connect to external power adapter, standard: DC 5V/2A RJ 45: network interface standard: 10/100M auto-adjusted internet interface, it can connect many kinds of devices, such as hub, router, and switch, etc.
4. Network connection Picture 3- network connection scheme 4.1 Connection instruction Before access IP Camera, first to confirm the network connection and the power supply, to check if the status lens normal. For connection as picture 3: 1）camera-1 and camera-2 is connected to two different LANs 2）the two LANs must connect to internet and have routers connecting through ADSL or optical fiber, etc. 3）computer-3 should be a device connecting to internet 4.
IP Camera-1’s IP into 192.168.0.126, it can access; 2）computer and camera are in different LANs, but both of them can access internet. For camera-1 and computer-2 in picture 3, to access camera-1 through computer-2, then need to set step 1）first to confirm computer-1 can access camera-1, then configure router-1 （ router-1 should support port forwarding）, then computer-2 can apply to access camera-1 via router-1.
device.(details refer to: 5.6 ddns settings) Connect device to internet via ADSL, then it can be accessed via ddns through WAN. 4.4 Connect network via router 1) Connect device to LAN through cable 2) Configure device through IPcam tool. (Details refer to: 5.1 IPcamera tool) 3) Access device as administrator. 4) Access ddns setting page to enable DDNS service then click to restart device. (Details refer to: 5.6 ddns settings) 5) Then it can be accessed through internet. 5 Software operation 5.
Picture 4- LAN configuration interface Notice: device factory set IP: 192.168.1.126，port 81 Detail configuration: Please carefully check current computer information on right down side of interface, it lists information about computer-1’s IP configuration, if there are more network adapters in computer, please select the right network that camera-1 working on. IP address: configure IP address, it must confirm to be the same subnet within PC. Mask: default mask: 255.255.255.
Picture 5 login interface After installation, we can access video view page, as picture 7: - 12 - MH6E-E-A2
5.3 User operation If the pilot is Click to 4-picture view; click Record: click Snapshot: click Listen: click , it means the device is connecting network to 9-picture view to manually record to snapshoot picture ， it should turn ，then speak to camera, the sound can be heard from computer terminal, click again to close listen function Talk: click ，it turns ， talk to camera（through headset connecting computer） ，then we can hear the talking around camera. Click again to close talk function. 5.
click on device option, name, host address and Http port of “current LAN devices list” ， the information will be auto wrote in, then correctly input access user name and password then click “add”. Repeat that to add more devices.
Picture 8- 4-picutre Picture 9- 9-picture 5.5 Network configuration Basic network configuration IP address configuration: manually modify IP, mask, gateway, DNS, etc. Http port: normally, the default port is 81.
8888, etc. Picture 10- network configuration Wifi configuration To enable WIFI configuration referring to picture 11，click “Search” button，then will pop up a page of searched wireless network，select the right wireless network，then all parameter of the wireless network will auto write into the parameter blanks such as shown in picture 11（such as SSID, encryption, etc.） ，then input password and check it is ok.
do not know what is the IP address，hence，we should acquire the address via dynamic domain name server in internet，the camera-1 send a message to dynamic domain name server(ddns) from time to time，then the ddns can analyze the external IP address of the router-1 camera-1 connected，we can acquire the IP address of the server through dynamic domain name. Actually，the dynamic domain name stands for dynamic IP address，if we can not access device through IP address, the dynamic domain name is not available.
the dynamic domain name. Notice: usually, third party ddns uses analyzing mode to access device， it will keep the link still after inputting on browser，if device port is not 80，then need to add a”:” then the port behind dynamic domain name，such as: http://ipcam.3322.org:81 5.7 Email service settings Picture 14- email service configuration In picture 14, the configured content is must，if that information is not correct，then the configuration is failed.
information is available. SMTP server: input the SMTP server of email server Sender address: input email address to send email Receiver address: input email address to receive snapshots and IP address. It can support 4 receivers.
7 Appendix 7.1 Familiar problem What could we do when forgot the login password? On power condition，press reset button（on the device bottom）till 10 seconds， then device is set to factory settings，including administrator user and password. Default user: admin Default password: no password What could we do when the view screen is white? Please adjust video parameters of camera（mode, brightness, contrast, saturation, etc.）.
it enjoys free maintain but paying for parts exchange. c) Send product with warranty card to manufacturer or seller for maintain. d) Privately open device shell and tear up seal affixed label are not in warranty permission. e) Device with modification or extra-installation function is not acceptable. The following circumstances without warranty a) Normal wear and tear caused periodic check, maintains or parts exchange. b) Damage caused by fall, squeezing, man-made flooding, damp and other man-made reasons.
7.
