Table of Contents 1 Brief Introduction ........................................................................................................................ 1 2 Installation Guide......................................................................................................................... 1 3 Software Instructions ................................................................................................................... 4 3.1 Main Interface .............................................
1 Brief Introduction The software used to realize the central control for all internet video monitor devices (including:DVS and IP camera) : monitor, data storage, data transfer\manage\control. This version support 1/4/6/8/9//12/16//20/25/30 display, OSD setting, talkback, record playback, alarm control and MD, etc. The interface is friendly and easy, can help to control more than one device in same time.
Click 【Next】, the window below will pop up: Press 【Browse…】 to change the default path. If you do not want to change, press 【Install】. The below window will pop up: 2 MV-H7E-E-2.3.3.
Then the setup is completed successfully. 3 MV-H7E-E-2.3.3.
3 Software Instructions 3.1 Main Interface Run DVS Client software, need input password, default is blank. Please refer 【Client Setup】 → 【local user management】for user name and password change. The interface as below: For the first login, user need add the IP address/domain name in order to trigger the monitor screen, the steps are as follows: ① Click on the right side, pop following dialog: 4 MV-H7E-E-2.3.3.
Mark1: If device not in same network segment, the software can search the IP address but can’t link. Please change device and pc in same segment. Mark2: Default IP is 192.168.0.233, gateway is 192.168.0.1. ② Can add device IP address/ Domain name by manual, click【add】 pop following dialog: ③ Input device IP/domain name, eg input IP/Host testdvs.3322.org, port 8001, device type “DVS/IP-CAM”,click 【OK】 pop following dialog: 5 MV-H7E-E-2.3.3.
④ Choose the right device, input user name and password, default is admin, as following: ⑤ Click 【Connect】, the right column will display the device address, choose “channel 1”, hold the left button, drag it to the need window, as following: 3.2 The main interface function 3.2.1 Toolbar Followed by login info, talk, sound, snap, record, color, setup, rotation, play. :Click to check device user number 6 MV-H7E-E-2.3.3.
/ : Click for Talk off/on / : Click for Sound off/on :Click for current channel snap / : Click to start or off record. Click Click for record path setting, for record playback :Click for brightness/contrast/Saturation/color setting. Default 128 , range is 0-255 / : Click for current screen off/on :Click for screen rotation :Click for image quality/OSD/screen mask/MD setting 3.2.1.
3.2.1.2 OSD OSD is “on screen display”, mean the info accompany with the image. Allow setting channel info, time, text color and position. 3.2.1.3 Sheltered Area Sheltered Area as needed. Hold 【ctrl】 to drag mouse choose the area, click 【clear】 to delete it. The mask effect as below: 8 MV-H7E-E-2.3.3.
3.2.1.4 Motion Detection 【Area setting】Hold 【ctrl】 choose the area, max 4 zones allowed. 【Sensitivity】Setting high for high sensitivity. 【Valid Period of Time】Setting MD valid period and alarm valid period. 【Action】Buzz, notify client,send e-mail. 【Output to】Choose the display channel. 9 MV-H7E-E-2.3.3.
3.2.2 PTZ Control Click Click adjust aperture Click adjust lens Click up/down/left/right control pan&tliti or hold mouse left key adjust direction by adjust focus drag the middle dot Preset :choose preset from drop down list can control pt to the setting position. Click the mouse right key then choose 【set current view as a preset point】for preset . Cruise :Click setting the route or choose the already one by drop down list, click to stop the cruise.
3.2.3 Device List Display connected devices name, domain name, channel name ,etc. Click device. Click to pop device property dialog. Click to add connect or disconnect device. 3.2.4 Interface Structure Click following button can adjust your own display mode. Click click save or delete. 11 MV-H7E-E-2.3.3.
Click switch display mode, 1/4/6/8/9//12/16//20/25/30 optional 3.2.5 Other Function 3.2.5.1 Screen Switch Click to start or stop screen switch ( mean the switch is in process). 3.2.5.2 Client_side Setup Client Setup Click to setup record path/alarm trigger record period/sound/last time scene. More than one path can be saved, the top one will be the default record path. 12 MV-H7E-E-2.3.3.
Record up limit 1024M/7200s Video Switch Setting It will realize multi-device or different channels switch in one screen. Click 【page】 arrow to add/delete page, click【stay】arrow to add/delete standstill period, click【 】 choose display mode, hold mouse left key drag the wanted channel to the right column or delete it by double click the channel name. 13 MV-H7E-E-2.3.3.
Local User Management Default password is blank. After login, allow add new user and related password/private. Password will be needed when quit under 【Full Screen】. 14 MV-H7E-E-2.3.3.
Automatic_Record Allow time record channel/period setting, save path setting in【client setup】. The interface indicator will blink after start this function. 15 MV-H7E-E-2.3.3.
3.2.5.3 Playback pop following dialog, Search need file through catalog or event list. Double Click click to play the file. Please choose device IP under 【Device-side File】then click【Find】when check file in SD card. Mark1:Event mean trigger MD or alarm, event record mean MD or alarm trigger record. Mark2:Device port file mean file save in linked SD card. 16 MV-H7E-E-2.3.3.
3.2.5.4 Language Version The software support Chinese and English, click pop to switch. 3.2.5.5 Full Screen Click change to full screen mode, all action will be locked under this mode, input administrator password when quit. Click the right button to pop: Choose to pop alarm info 3.3 Device property Click or choose IP address in device list, click 【Property】 by right key to pop dialog, setup or adjust IP address、DDN、PPPoE、broadcast configuration、user management、 update online,etc. 3.3.
Mark1: IP address will valid only after device restart. Mark2: When link 2 or more devices, need change related IP address and physical address. Mark3: Outer net visit need mapping the service port, refer router configuration part. DNS server needs change to current DNS IP address also. 3.3.2 DDNS DDNS mean dynamic DNS, for unfixed IP domain name mapping. This client software support peanut shell、3322 and our company DDNS service. Just apply your domain name in the proper network station(refer to Part3.
【Password】The related password when you apply the domain name. 【Dynamic Domain Name】According to domain integrated address. 3.3.3 PPPoE The client software allow PPPoE . Link the device to phone line through modem, dial to internet. User can visit the monitor picture by internet from long distance. Choose PPPoE in following dialog then input user name and password then click 【OK】. 19 MV-H7E-E-2.3.3.
3.3.4 Multicast Use set device as needed to realize the multicast function. 20 MV-H7E-E-2.3.3.
3.3.5 E-Mail When choose mail service, the device will send event report and picture to the appointed mailbox when alarm or MD triggered. 【SMTP Server】Follow your mailbox hints for related setup. 【SMTP Port】default 25. 【 Sender’s Account 】 Need according to the SMTP service if your mailbox support. 【User Account】auto catch account info. 【Password】Account related password. 【Receiver’s Account】Any mailbox which can receive mail. Click【Send A Test Mail】after setup to confirm your action. 21 MV-H7E-E-2.3.3.
Mark: For outlook or foxmail user, need set the sender account to valid the function. 3.3.6 Date/Time Adjust device date, time. Click【Same with PC】to synchronous with pc. 22 MV-H7E-E-2.3.3.
3.3.7 Alarm In 【channel】Allow setup name for choosed channel. 【Actions take to response to alarm】Sound alarm, notice client , send e-mail. 【Output to 】Setup output channel. 【PTZ linkage】Seperate、preset、cruise. Moniter channel must be appointed when choose preset or cruise mode. 【Valid period of time】 Setup alarm input time period. + mean valid period,mean except the period. Mark: The record in SD card will lead the real record time add 0-20s base the setting. 23 MV-H7E-E-2.3.3.
3.3.8 Alarm Out 【channel】Allow setup name for choosed channel 【Valid period of time】Setup alarm output time period. + mean valid period,mean except the period 3.3.9 PTZ 【Video Channel】choose video channel. 【Address】Matching the PTZ address with protocol. 【Protocol】Support Palco-D & Palco-P, default is Palco-D. 【Step Length】 Range 1~64, default 32. High speed will make the control hard , suggest under 32 for high speed dome. 【Comm Setting】 Set baud rate, data bit, stop bit, parity bit. 24 MV-H7E-E-2.3.3.
3.3.10 Video Channel 【Channel】Choose the channel no. 【Name】Setup channel name. 【Resolution】QCIF / CIF / Half_D1 / D1. 【PAL/NTSC】Choose PAL or NTSC. Mark1: Need restart device to valid new setup. Mark2: 4 channel DVS only support channel 1 set as D1 format. 25 MV-H7E-E-2.3.3.
3.3.11 User User management is use to add, delete or modify user name and password, and setup corresponding authority. User name can only be English character or number,Chinese is no supported, maximum length of user name or password is 10 characters. User is separated into three classes: ◆ Normal User: Admit to brown monitor image, no authority to setup device and manage user. ◆ Power User: Admit to setup device, no authority to manage user ◆ Administrator: Authorized to setup device and manage user.
3.3.12 Update User can update device local by client or long distance through IE. Device will auto restart after upgrade. User can check current version no. here. 【Current version 】Display current version, not allow edit. 【File to upload】 Click【Open】find the file then click【Upload】, the following dialog will show the progress. The device will auto restart after upgrade, not shut off during the process. Mark: Online upgrade file DAT is pk2.
3.3.13 Record The record property will auto display when link to SD card. In other condition, please click 【IP】→【Property】→【Record】to pop the dialog: Set file limit, 0 mean no limit Valid record period Mark1: Please cut off device before plug SD card. Mark2: Choose FAT32 type when format SD card. Mark3: Click choose 【Device-Side File】 to review record, see diagrammatic presentation: 28 MV-H7E-E-2.3.3.
3.3.14Wireless NIC Wireless network card property will auto display; in other condition click 【IP】→【Property】 →【Record】 to pop the dialog: 4 Other 4.1 LAN and WAN configuration ♦ LAN automatically search Run DVS Client, Click , the video server in the local LAN will appear in the device list. Only PC and video server in same network segment can connect.
① Register DDNS services from a DDNS service provider. After applications a domain name will be assigned, and an account number and password will be obtained. ② Click mouse right key in device list up item, choose 【Property】→【DDNS】 set your domain info ,please see 3.3.2 for details. ③ When Internet IP is changed. The device will automatically tell DDNS server its new Internet IP. ④ Users only input domain in the network browser can run Client. 4.
】 download the control nvx.exe , then install it. Click【 Then input user name and password (default is admin ) can get monitor page, see below: 31 MV-H7E-E-2.3.3.