Table of Contents 1. Safety Warnings ............................................................................................................................ 3 2. Hard Disk Installation ................................................................................................................... 4 3. Product Description....................................................................................................................... 6 4. Technical Specifications.................................
1. Safety Warnings For your safety, please read and follow the following safety warnings: 1. Do not expose the NVR to any heat sources. 2. Please make sure the environment is well-ventilated. Do not block the ventilation opening of the NVR. 3. Keep all liquids away from the NVR. 4. Ensure that the NVR is provided with the correct supply voltage. Plugging the NVR to an incorrect power source could damage the unit. 5. Make sure the temperature and humidity of the environment are in optimized level. 6.
2. Hard Disk Installation Notice Please install DVR-specific hard disks recommend by our company. NR-1-A4 series can install a maximum of 1 hard disk. Please make sure the device is turned off before installation. Installation Tool: Phillips screwdriver NR-1-A4 series hard disk installation procedure: 1. Unscrew the nuts on the rear panel and then take off the chassis cover. 2. Put the hard disk in the chassis, and then fix it on the hard disk bracket by using the screw driver. 3.
Red for hard disk data line, black for power connection line. 4.Cover the chassis and then fix it with the screwdriver.
3. Product Description NR-1-A4 Series Front View: NR-1-A4 series supports maximum 1 hard disk. There are three LED indicators on the front panel to show the current device status. The visible angle of the LED indicators is 170°. LED Indicators: Name Power Status LED Description If the light is lit continuously, it indicates that the device is powered. Network Status LED If the light continues flashing, it indicates that the network is in its normal status.
Name Connection instruction Power switch Power on/off Power connector 12V power connector RJ45 connector 100M network connector 7
4. Technical Specifications Model NR-1-A4 Video compression H.
5. Turning On / Off the Device 1. Turn On the device After the power socket is connected, press the power switch on the rear panel of NVR. 2. Turn Off the device Press the power switch on the rear panel of the device. Note: Please make sure that the power supply is compatible to the required power supply according to technical specifications.
6. Client Software Instruction 1. Run Client Software Run Nvr_Clairvoyance.exe (globe icon)in standalone software package and then a login screen will welcome you. Enter your user name and password then click the “Login” button to Login. (Both user name and password are “admin” by default.
Figure 2 2. Search for NVR and IP Camera After login, right click “Network video server”, and then click “searching tool”.
On “NVR-SET” screen, you will see three sub-screens including “default parameters list” which shows default parameters of NVR hosts and IP Cameras, “network camera list” which shows all the online IP cameras’ IP on current LAN and “NVR host list” which shows all the online NVR hosts’ IP on current LAN. As shown in Figure 4: Figure 4 3. Modify IP 1.
Figure 5： Chose "NVR search" ---“get NVR”,and then in “UDP Network settings” it will show all the IP address of online NVR hosts.Select the NVR IP you will modify, and then will display the current (camera IP/subnet mask/gateway/MAC) on the right, after modify, click "Settings".
Figure 6 Note: UDP network setting only use for LAN, does not support across segments use. TCP network Settings only for this machine setting, no network restrictions. NVR default IP is 192.168.1.243, you can set your NVR IP,Subnet mask, gateway according to your specific LAN. 4. Add IP Camera Chose :Device settings" ,click NVR ip address:192.168.1.
Figure 7 Click on drop-down frame of the device type,select the camera model you want to add.Now can add EasyN H3 and EasyN F2 two series of camera.
Figure 9 After select EasyN-H3 in the device type , please click "search"button Figure 10 Click drop-down list of device IP ,will display a LAN online EasyN H3 series camera IP address, select one .
Figure 11 Device name : user-defined Device IP:you can search it or input it directly Port: it is the port of your camera , you can find it in the search IP cam software User name: camera login administrator account. Password:camera login password Channel number:1 Begin channel :1 After the completion of the input, click "confirm", add success.
Figure 12 Click "add channel",input 1 into "channel",then click "confirm". Other parameter can be adjust according to the specific condition .
Figure 14 Figure 15 Click "add schedule",in the drop-down list of "video type",select your record requirement, normally , we will select timing record.
Figure 16 Select begin time and end time , then click "confirm".
Successful add a camera after doing "add device" "add channel" "add schedule" three steps.
5. Add"NVR Host" Click “navigation” --- right click “Network video server” --- click “add network video server”, and then input the following parameters in “Nvr information” according to the following instruction: “device name”: you can input any name as you want “device type”: NVR “device IP”: input the IP of the NVR host you will add “login port”: 13801 “user name”: admin “password”: 12345 “download port”: 13800 After input those parameters, click “login device” --- “get parameter” --- “upload”.
After successfully uploading, click the “logout” in the main interface, and then login again. When you successfully login, you can see both the NVR and IP cameras you have added just now in “Network video server”.
Figure 19 Figure 20 24
Figure 21 Figure 22 Return to main screen, under network video server that is the information of NVR and camera.
Figure 23 Hold the left button of your mouse, drag camera name(like H3 test )to the needed window,as following : Figure24 26
6. Harddisk Management Click “Disk management ----- click “format” to format selected hard disk (The maximum capacity of each hard disk is 2TB). As shown in Figure 25: Figure 25 7. Search for NVR Log Click “NVR log”, select and click the date you will review, select and check one log type (“alarm log” / “operation” / “error log”) you will review, and then click “get” to review the log details.
Figure 26 8. Online Backup Click “Online backup settings” --- “add”, input NVR IP you will backup in “backup NVRIP”, and then click “confirm”.
9. User and User Rights Settings 1. Add User: Right click “User”, click “add user” and input parameters in “user name” and “password” and then click “save”. As shown in Figure28: Figure 28 2. User Rights Settings: As shown in Figure 28, under the “authorization information”, the rights of “setting” / “navigation” are for users, while the rights of “scene monitoring”/ “video playback” / “scene snapshot” / “device time verification” are for the devices (which means for NVR hosts and IP cameras). 10.
Figure 29 11. Alarm Settings / Streaming Media Settings 1. Alarm Settings: Click “setting” --- “Alarm setting” --- select “alarm type” --- select “processing mode” --- click “receive alarm” to complete setting.
2. Streaming Media Settings: Click “setting” --- “Streaming media setting” --- check “enable local streaming media setting” --- input the NVR’s IP address in “streaming media IP”--- input “12000” in “port” --- click “update” to complete setting. As shown in Figure 31: Figure 31 3,Audio/OSD:The operation method is similar to 1 . 12. Monitor View (1, 4, 9, 16 view layout, save view, get view and select task) 1. Select the cameras you will monitor in “network navigator”--- drag it to preview windows.
Figure 32 2. Select the NVR you will monitor in “network navigator” and right click it --click “monitor all cameras” to monitor all the cameras connected on that NVR. As shown in Figure 33: Figure 33 13. Power off / Reboot / Verify time Right click the NVR you will set under “Network video server”, and then you can click “power off”, “reboot” and “verify time” as you need.
Figure 34 14. NVR Parameter Backup and Recovery Right click the NVR you will backup in “Network video server” --- click “parameter” --- click the icon “ ” to find “Parameter backup and recovery” and click it to backup or recover. (Only when the NVR host and the hard disk are in normal operation status can this function be applied.
Figure 36 15. NVR Transmit 1. Click “navigation” --- Double click the NVR you will transmit --- check “Nvr transmit” in “Nvr information” to complete.
Figure37 2. Click “Global settings” --- click “modify” to set relevant parameters as you need--- click “enable agents transmit” to enable the function. As shown in Figure38: Figure 38 3. Click “NDVR search”. In “TCP Network settings”, users can set two IP addresses.
function is mainly used when there are not enough IP addresses to assign. Users can set one IP address for the NVR, and set one IP address which is in the same network segment with the IP cameras. Then users can set cameras’ IP addresses as they need unlimitedly without occupying the limited IP used by other devices like PC or NVR.This function is extremely useful in large network monitor project or install network monitor in the original network .) As shown in Figure 39: Figure 39 4.
“PTZ control” to enter the PTZ control interface. As shown in Figure 40: Through this function can remote control front PTZ equipment, use PTZ lens control function, can adjust camera decrease or increase the vision to see better screen, also can control the camera run horizontal and vertical for better control in an all-around monitor area . Once selected monitoring screen, click the arrow buttons can control movement ,focus and zooming of the corresponding direction .
Warranty During the period of warranty, users will not be charged for maintenance of any breakage resulting from the products ‘own failures. 1 Warranty Terms a) Free-of -Charge maintenance period of the product is 18 months. During this time, we can repair it for free (Damages not caused by misuse or vandalism). For reparation after guarantee period, a maintenance fee will be charged.
2. Warranty Card Please cut the follow form for information and return with camera Product model Maniufacture date Client agency User name User address Contact Maintain time Problem details Result Note： Address: Block 1,Xingfa Industryzone Tiegang, Xixiang town, Bao'an district, Shenzhen, Guangdong, China 518102.
